My Cart
Your Cart 0

    Your cart is empty.

  • Total (Amount) ₹0.00
NCERT · Class 12 · Physics

Chapter 11: Dual Nature of Radiation and Matter

Practice each question, then open the answer or worked solution.

Questions

32 questions
Q11.6Written answer

In an experiment on the photoelectric effect, the slope of the cut-off
voltage versus frequency of incident light is found to be 4.12 × 10-15 V s. Calculate the value of Planck’s constant.

Show solutionHide solution
Worked solution

Given that the slope of cut-off voltage (V) versus frequency (v) is:

\(\begin{array}{l}\frac{V}{v}\end{array} \)
-15

V and frequency are related by the equation:

Hν = eV

Where,

e = Charge on an electron = 1.6 x 10-19 C

h = Planck’s constant

Therefore, h = e x

\(\begin{array}{l}\frac{V}{v}\end{array} \)

= 1.6 x 10-19 x 4.12 x 10-15 = 6.592 x 10-34 Js

Therefore, 6.592 x 10-34 Js is the Planck’s constant that is determined from the above equation.

Q11.7Written answer

A 100 W sodium lamp radiates energy uniformly in all directions. The lamp is located at the centre of a large sphere that absorbs all the sodium light which is incident on it. The wavelength of sodium light is 589 nm. (a) What is the energy per photon associated with sodium light? (b) At what rate are the photons delivered to the sphere?

Show solutionHide solution
Worked solution

Power of the sodium lamp P = 100W

Wavelength of the emitted sodium light,

\(\begin{array}{l}\lambda\end{array} \)

= 589 x 10-9 m

Planck’s constant, h = 6.626 x 10-34 Js

Speed of light, c = 3 x 108

(a)

The energy per photon associated with the sodium light is given as:

E =

\(\begin{array}{l}\frac{hc}{\lambda }\end{array} \)

E =

\(\begin{array}{l}\frac{6.626\times 10^{-34}\times 3\times 10^{8}}{589\times 10^{-9}}\end{array} \)

= 3.37 x 10-19 J =

\(\begin{array}{l}\frac{3.37\times 10^{-19}}{1.6\times 10^{-19}}\end{array} \)
= 2.11 eV

(b)

Number of photons delivered to the sphere = n

The equation for power can be written as:

P = nE

Therefore, n=

\(\begin{array}{l}\frac{P}{E}\end{array} \)

=

\(\begin{array}{l}\frac{100}{3.37\times 10^{-19}}\end{array} \)
20

Therefore, 2.96 x 1020 photons are delivered every second to the sphere.

Q11.8Written answer

The threshold frequency for a certain metal is 3.3 x 1014 Hz. If the light of frequency 8.2 x 1014 Hz is incident on the metal, predict the cut-off voltage for the photoelectric emission.

Show solutionHide solution
Worked solution

Threshold frequency of the metal, vo= 3.3 × 1014 Hz

Frequency of light incident on the metal, v= 8.2 × 1014 Hz

Charge on an electron, e = 1.6 × 10-19 C

Planck’s constant, h = 6.626 × 10-34 Js

Cut-off voltage for the photoelectric emission from the metal = Vo

The equation for the cut–off energy is given as:

eVo = h(ν – νo)

Vo =

\(\begin{array}{l}\frac{h(v-v_{o})}{e}\end{array} \)

=

\(\begin{array}{l}\frac{6.626\times 10^{-34}\times(8.2\times 10^{14}-3.3\times 10^{14})}{1.6\times 10^{-19}}\end{array} \)
= 2.0291 V

Therefore, the cut-off voltage for the photoelectric emission is 2.0291 V.

Q11.9Written answer

The work function for a certain metal is 4.2 eV. Will this metal give photoelectric emission for incident radiation of wavelength 330 nm?

Show solutionHide solution
Worked solution

Work function of the metal,

\(\begin{array}{l}\Phi _{o}\end{array} \)
= 4.2eV

Charge on an electron, e = 1.6 x 10-19 C

Planck’s constant, h = 6.626 × 10-34 Js

Wavelength of the incident radiation,

\(\begin{array}{l}\lambda\end{array} \)
= 330  × 10-9 m

Speed of light, c = 3 × 108 m/s

The energy of the incident photon is given as:

E =

\(\begin{array}{l}\frac{hc}{\lambda }\end{array} \)

=

\(\begin{array}{l}\frac{6.626 \times 10^{-34}\times 3\times 10^{8}}{330\times 10^{-9}}\end{array} \)

= 6.0 x 10-19 J =

\(\begin{array}{l}\frac{6.0\times 10^{-19}}{1.6\times 10^{-19}}\end{array} \)
= 3.76 eV

The energy of the incident radiation is less than the work function of the metal. Hence, there is no photoelectric emission takes place.

Q11.10Written answer

Light of frequency 7.21 x 1014 Hz is incident in a metal surface. Electrons with a maximum speed of 6.0 x 105 m/s are ejected from the surface. What is the threshold frequency for the photoemission of electrons?

Show solutionHide solution
Worked solution

Frequency of the incident photon, ν = 488nm = 488 x 10-9m

The maximum speed of the electrons, v = 6.0 x 105 m/s

Planck’s constant, h= 6.626 x 10-34 Js

Mass of an electron, m = 9.1 x 10-31 Kg

For threshold frequency vo, the relation for kinetic energy is written as:

\(\begin{array}{l}\frac{1}{2}mv^{2}\end{array} \)
o

νo = ν –

\(\begin{array}{l}\frac{mv^{2}}{2h}\end{array} \)

= 7.21 x 1014 –

\(\begin{array}{l}\frac{(9.1 \times 10^{-31})\times (6\times 10^{5})^{2}}{2 \times (6.626 \times 10^{-34})}\end{array} \)

= 7.21 x 1014 – 2.472 x 1014 = 4.738 x 1014 Hz

Therefore, 4.738 x 1014 Hz is the threshold frequency for the photoemission of the electrons.

Q11.11Written answer

Light of wavelength 488 nm is produced by an argon laser which is used in the photoelectric effect. When light from this spectral line is incident on the emitter, the stopping (cut-off) potential of photoelectrons is 0.38 V. Find the work function of the material from which the emitter is made.

Show solutionHide solution
Worked solution

The wavelength of light produced by the argon laser,

\(\begin{array}{l}\lambda\end{array} \)
= 488 x 10-9 m

Stopping potential of the photoelectrons, Vo = 0.38 V

1eV = 1.6 x 10-19 J

Therefore, Vo =

\(\begin{array}{l}\frac{0.38}{1.6\times 10^{-19}}\end{array} \)

Planck’s constant, h = 6.6 x 10-34 Js

Charge on an electron, e = 1.6 x 10-19 C

Speed of light, c = 3 x 108 m/s

Using Einstein’s photoelectric effect, the following is the relation for the work function:

\(\begin{array}{l}\Phi _{o}\end{array} \)

eVo =

\(\begin{array}{l}\frac{hc}{\lambda } – \phi _{o}\end{array} \)
\(\begin{array}{l}\Phi _{o}\end{array} \)
\(\begin{array}{l}\frac{hc}{\lambda }\end{array} \)
o

=

\(\begin{array}{l}\frac{6.6\times 10^{-34}\times 3\times 10^{8}}{1.6\times 10^{-19}\times 488\times 10^{-9}} – \frac{1.6\times 10^{-19}\times 0.38}{1.6\times 10^{-19}}\end{array} \)

= 2.54 – 0.38 = 2.16 eV

Therefore, 2.16 eV is the work function of the material with which the emitter is made.

Q11.12Written answer

Calculate the following:

(a) Momentum

(b) The de Broglie wavelength of the electrons accelerated through a potential difference of 56 V.

Show solutionHide solution
Worked solution

The potential difference, V = 56V

Planck’s constant, h = 6.6 x 10-34 Js

Mass of an electron, m = 9.1x 10-31 Kg

Charge on an electron, e = 1.6 x 10-19C

(a) At equilibrium, the kinetic energy of each electron is equal to the accelerating potential, i.e. we can write the relation of velocity (v) of each electron as:

\(\begin{array}{l}\frac{1}{2}mv^{2}\end{array} \)
\(\begin{array}{l}v^{2}=\frac{2eV}{m}\end{array} \)

Therefore, v =

\(\begin{array}{l}\sqrt{\frac{2\times 1.6\times 10^{-19}\times 56}{9.1\times 10^{-31}}}\end{array} \)

=

\(\begin{array}{l}\sqrt{19.69\times 10^{12}}\end{array} \)

= 4.44 x 106 m/s

The momentum of each accelerated electron is given as:

p = mv

= 9.1 x 10-31 x 4.44 x 106 = 4.04 x 10-24 Kg m/s

Therefore, 4.04 x 10-24 Kg m/s is the momentum of each electron.

(b) de Broglie wavelength of an electron accelerating through a potential V is given by the relation:

\(\begin{array}{l}\lambda\end{array} \)
\(\begin{array}{l}\frac{12.27}{\sqrt{V}}\end{array} \)
o

=

\(\begin{array}{l}\frac{12.27}{\sqrt{56}}\end{array} \)
-19= 0.1639 nm

Therefore, 0.1639 nm is the de Broglie wavelength of each electron.

Q11.13Written answer

Find the following:

(a) Momentum,

(b) Speed, and

(c) De Broglie wavelength of an electron with a kinetic energy of 120 eV.

Show solutionHide solution
Worked solution

Kinetic energy of the electron, EK = 120 eV

Planck’s constant, h = 6.6 × 10-34 Js

Mass of an electron, m = 9.1 × 10-31 Kg

Charge on an electron, e = 1.6 × 10-19 C

(a) For an electron, we can write the relation for kinetic energy as:

Ek = 

\(\begin{array}{l}\frac{1}{2}mv^{2}\end{array} \)

Where, v = speed of the electron

Therefore,

\(\begin{array}{l}v^{2}=\sqrt{\frac{2eE_{k}}{m}}\end{array} \)

=

\(\begin{array}{l}\sqrt{\frac{2\times 1.6\times 10^{-19}\times 120}{9.1\times 10^{-31}}}\end{array} \)

=

\(\begin{array}{l}\sqrt{42.198\times 10^{12}}\end{array} \)

= 6.496 × 106 m/s

Momentum of the electron, p = mv = 9.1 × 10-31 × 6.496 × 106

= 5.91 × 10-24 kg m/s

Therefore, 5.91 × 10-24 Kg m/s is the momentum of the electron.

(b) speed of the electron, v = 6.496 × 106 m/s

(c) de Broglie wavelength of an electron having a momentum p is given as:

\(\begin{array}{l}\lambda =\frac{h}{p}\end{array} \)

=

\(\begin{array}{l}\frac{6.6\times 10^{-34}}{5.91\times 10^{-24}}\end{array} \)
-10= 0.112 nm

Therefore, 0.112 nm is the de Broglie wavelength of the electron.

Q11.14Written answer

The wavelength of light from the spectral emission line of sodium is 589 nm. Find the kinetic energy at which

(a) an electron, and

(b) a neutron, would have the same de Broglie wavelength.

Show solutionHide solution
Worked solution

Wavelength of light of a sodium line,

\(\begin{array}{l}\lambda\end{array} \)
-9

Mass of an electron, me = 9.1 x 10-31 Kg

Mass of a neutron, mn = 1.66 x 10-27 Kg

Planck’s constant, h = 6.6 x 10-34 Js

(a) For the kinetic energy, K, of an electron accelerating with the velocity v, we have the relation:

K =

\(\begin{array}{l}\frac{1}{2}mv^{2}\end{array} \)
(1)

We have the relation for de Broglie wavelength as:

\(\begin{array}{l}\lambda = \frac{h}{m_{e}v}\end{array} \)

Therefore,

\(\begin{array}{l}v^{2} = \frac{h^{2}}{\lambda ^{2}m_{e}^{2}}\end{array} \)
(2)

Substituting equation (2) in equation (1), we get the relation:

K =

\(\begin{array}{l}\frac{1}{2}\end{array} \)
\(\begin{array}{l}\frac{m_{e}h^{2}}{\lambda ^{2}m_{e}^{2}}\end{array} \)

=

\(\begin{array}{l}\frac{h^{2}}{2\lambda^{2}m_{e} }\end{array} \)
(3)

=

\(\begin{array}{l}\frac{(6.6\times 10^{-34})^{2}}{2\times (589\times 10^{-9})^{2}\times 9.1\times 10^{-31}}\end{array} \)

= 6.9 x 10-25 J =

\(\begin{array}{l}\frac{6.9\times 10^{-25}}{1.6\times 10^{-19}}\end{array} \)
= 4.31 x 10-6 eV

Hence, the kinetic energy of the electron is 6.9 x 10-25 J.

(b) Using equation (3), we can write the relation for the kinetic energy of the neutron as:

=

\(\begin{array}{l}\frac{h^{2}}{2\lambda ^{2}m_{n}}\end{array} \)

=

\(\begin{array}{l}\frac{(6.6\times 10^{-34})^{2}}{2\times (589\times 10^{-9})^{2}\times 1.66\times 10^{-27}}\end{array} \)

= 3.78x 10 -28 J

=

\(\begin{array}{l}\frac{3.78\times 10^{-28}}{1.6\times 10^{-19}}\end{array} \)

= 2.36 x 10-9 eV = 2.36 neV

Therefore, the neutron has a kinetic energy of 3.78 x 10-28 J or 2.36 neV.

Q11.15Written answer

What is the de Broglie wavelength of:

(a) a bullet of mass 0.040 kg travelling at the speed of 1.0 km/s,

(b) a ball of mass 0.060 kg moving at a speed of 1.0 m/s, and

(c) a dust particle of mass 1.0 × 10-9 kg drifting with a speed of 2.2 m/s?

Show solutionHide solution
Worked solution

(a) Mass of the bullet, m = 0.040 Kg

The speed of the bullet, v = 1.0 km/s = 1000 m/s

Planck’s constant, h = 6.6 x 10-34 Js

de Broglie wavelength of the bullet is given by the relation:

\(\begin{array}{l}\lambda = \frac{h}{mv}\end{array} \)

=

\(\begin{array}{l}\frac{6.6\times 10^{-34}}{0.040\times 1000}\end{array} \)

= 1.65 x 10-35 m.

(b) Mass of the ball, m = 0.060 Kg

The speed of the ball, v = 1.0 m/s

de Broglie wavelength of the ball is given by the relation:

=

\(\begin{array}{l}\lambda = \frac{h}{mv}\end{array} \)

=

\(\begin{array}{l}\frac{6.6\times 10^{-34}}{0.060\times 1}\end{array} \)

= 1.1 x 10-32 m.

(c) Mass of the dust particle, m = 1 x 10-9 Kg

The speed of the dust particle, v = 2.2 m/s

de Broglie wavelength of the dust particle is given by the relation:

=

\(\begin{array}{l}\lambda = \frac{h}{mv}\end{array} \)

=

\(\begin{array}{l}\frac{6.6\times 10^{-34}}{2.2\times 1\times 10^{-9}}\end{array} \)

= 3.0 x 10-25 m.