My Cart
Your Cart 0

    Your cart is empty.

  • Total (Amount) ₹0.00
Exam Details

ESE (IES) Mechanical Engineering P2 2016

Review the key details, then start the test when you are ready. You can also open the full package to see related papers.

Questions 120
Duration 180 mins
Package ESE & GATE ME - Previous Year Papers

Paper pattern & analysis

Filter this paper by subject, topic or subtopic. Every graph updates from the selected questions.

Explore previous papers
Showing all 120 questions in this paper.

Subject distribution

No subject classification is available.

Topic distribution

No topic classification is available.

Subtopic distribution

No subtopic classification is available.

Difficulty distribution

Medium 75 62.5%
Hard 27 22.5%
Easy 18 15%

Question type distribution

Multiple Choices 120 100%

Instructions

Demo Instruction

Syllabus

Sample

Sample questions from this paper

Questions are selected across the paper subjects wherever the paper contains that variety.

1
2016 · Unclassified
ESE (IES) Mechanical Engineering P2 2016
Endurance limit is of primary concern in the design of a/an 1) rotating shaft 2) industrial structure 3) column 4) machine base Which of the above is/are correct?
A
1 only
B
3 and 4 only
C
1, 2, 3 and 4
D
2 only
2
2016 · Unclassified
ESE (IES) Mechanical Engineering P2 2016
A simply supported beam of rectangular cross-section is under transverse loading. Regarding the shear stress distribution across any section, the ratio of maximum shear stress to mean shear stress is
A
1.5
B
3.5
C
4.5
D
2.5
3
2016 · Unclassified
ESE (IES) Mechanical Engineering P2 2016
Two beams, one having a square cross-section and another a circular cross-section, are subjected to the same amount of bending moment. If the cross-sectional area as well as the material of both the beams are the same, then 1) Both the beams will experience the same amount of deformation 2) The circular beam experiences more extreme flexural stress than the square one Which of the above is/are correct?
A
1 only
B
2 only
C
Neither 1 nor 2
D
Both 1 and 2
4
2016 · Unclassified
ESE (IES) Mechanical Engineering P2 2016
A coil-spring of stiffness k is cut exactly at the middle and the two springs thus made are arranged in parallel to take up together a compressive load. The equivalent stiffness of the two springs is ____________.
A
0.25 k
B
0.5 k
C
2 k
D
4 k
5
2016 · Unclassified
ESE (IES) Mechanical Engineering P2 2016
Two solid shafts A and B are made of the same material. Shaft A is of 50 mm diameter and shaft B is of 100 mm diameter. The strength of shaft B is
A
2 times as that of shaft A
B
4 times as that of shaft A
C
6 times as that of shaft A
D
8 times as that of shaft A
6
2016 · Unclassified
ESE (IES) Mechanical Engineering P2 2016
A closely-coiled helical spring is made of 10mm diameter steel wire, with the coil consisting of 10 turns with a mean diameter 120 mm. The spring carries an axial pull of 200 N. What is the value of shear stress induced in the spring neglecting the effect of stress concentration and of deflection in the spring, when the modulus of rigidity is 80 kN/mm2?
A
63.5 N/mm2 and 34.6 mm
B
63.5 N/ =mm2 and 42.6 mm
C
54.2 N/mm2 and 42.6 mm
D
54.2 N/mm2 and 34.6 mm